#0
by boy-koff
Всех приветствую. Столкнулся со следующей проблемой: На одном сервере (Windows Server 2003 r2, x64) стоит 1с8.3 и установлен ключик HASP (красный, на 50 лицензий), на другом сервере (Windows Server 2008 r2, x64) так же стоит 1с8.3, на этом же сервере есть информационная база, при входе в которую появляется ошибка "Не обнаружена лицензия на запуск сервера". Подробная описание ошибки: --- На сервере 1С:Предприятия не найдена лицензия. Не обнаружен ключ защиты программы или полученная программная лицензия! по причине: Файл программной лицензии не найден локальный ключ недоступен: Status=0, EN8SA Локальный, не установлен Поиск лицензии в сервисе лицензирования: Файл программной лицензии не найден --- Содержимое файла nhsrv.ini: ;******************************************************************************* ;* ;* NetHASP License Manager sample configuration file. ;* ;* boolean switches may have the values ;* 0, no, false, disabled ;* ;******************************************************************************* ; ------------------------------------------------------------------------------ ; global LM settings ; ------------------------------------------------------------------------------ [NHS_SERVER] NHS_USERLIST = 250 ; maximum number of concurrent logins ; to this LM (default=250, max = 65520) NHS_SERVERNAMES = LM1 ; server names to match the name a client ; requests (max 6 names, max 7 chars/name) NHS_HIGHPRIORITY = no ; run LM at high priority (default=no) ; ------------------------------------------------------------------------------ ; settings for the IP protocol ; ------------------------------------------------------------------------------ [NHS_IP] ;NHS_USE_UDP = enabled ; enabled or disabled (default: enabled) NHS_USE_TCP = enabled ; enabled or disabled (default: enabled) NHS_IP_portnum = 475 ; IP port number (default: 475 (IANA registered)) ; CAUTION: clients must use the same port ! NHS_IP_LIMIT = 192.168.*.* ; specifies the range of stations that are allowed to access the LM ; the LAST byte may be a range (e.g., 10-120) ; the 4th, the 4th and 3rd, or the 4th and 3rd and 2nd byte may be an asterisk, ; acting as wildcard (e.g., 10.*.*.*, but NOT 10.*.20.1) ; an additional bitmask can be specified as number of one-bits (e.g., 10.0.0.0/8) ; ------------------------------------------------------------------------------ ; settings for the IPX protocol ; ------------------------------------------------------------------------------ ;[NHS_IPX] ;NHS_USE_IPX = enabled ; enabled or disabled (default: enabled) ;NHS_addrpath = c: emp ; pathname for haspaddr.dat (default: current dir) ;NHS_AppendAddr = no ; append to haspaddr.dat (default: replace) ;NHS_usesap = enabled ; enabled or disabled (default: enabled) ;NHS_ipx_socketnum = 0x7483 ; IPX socket number (default: 0x7483) ; CAUTION: clients must use the same number ! ; ------------------------------------------------------------------------------ ; settings for the NetBios protocol ; ------------------------------------------------------------------------------ [NHS_NETBIOS] NHS_USE_NETBIOS = disabled ; enabled or disabled (default: enabled) ;NHS_NBNAME = NB1 ; use another than predefined NetBios name ; CAUTION: clients must use the same name ! ; ------------------------------------------------------------------------------ ; end of file ; ------------------------------------------------------------------------------ Содержимое файла nethasp.ini: ; ; NetHASP Configuration file syntax. ; ; ; Note: ; ; All text lines were commented. ; Remove comments in the lines you want to use. ; [NH_COMMON] ; ; You can set either of the following three Keywords to "Enabled"! ; ;NH_IPX = Disabled ; Use the IPX protocol ;NH_NETBIOS = Disabled ; Use the NETBIOS protocol NH_TCPIP = Enabled ; Use the TCP/IP protocol ; ; General Keywords ; ;NH_SESSION = 15 ; See Adapting the Timeout Length ;NH_SEND_RCV = 30 ; in the HASP Programmer's Guide. ;[NH_IPX] ; ; Section-specific Keywords for the IPX protocol. ; ;;NH_NCLIENT32 = Disabled ; Disable Novell Client use ;;NH_GET_LOCAL_TARGET = Disabled ; Disable LM search over segments ;;NH_USE_BINDERY = Enabled or Disabled ; Use IPX with bindery. ; Default: Disabled ; Ignored under Win32 API. ; This switch replaces older switch ; named NH_USE_SAP. ;;NH_USE_BROADCAST = Enabled or Disabled; Use IPX Broadcast mechanism. ;;NH_BC_SOCKET_NUM = <Number> ; Broadcast socket number (HEX). ;;NH_USE_INT = 2F_NEW or 7A_OLD ; 2F_NEW means that IPX protocol will ; use interrupt 2Fh ONLY. ; 7A_OLD means that IPX protocol will ; use interrupt 7Ah ONLY. ;;NH_SERVER_NAME = <Server10> ; Communicate with the NetHASP ; Server with the specified name. ; Maximum: 6 names, up to 7 ; case-insensitive characters each. ;;NH_SEARCH_METHOD = Localnet or Internet ; See Local Networks and ; Internetworks in the HASP ; Programmer's Guide. ;;NH_DATFILE_PATH = <path> ; Specify the location of the NetHASP ; License Manager's address file. ; ; ;;NH_SESSION = <Num> ; See Adapting the Timeout Length ;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide. [NH_NETBIOS] ; ; Section-specific Keywords for the NetBIOS protocol. ; NH_NBNAME = NB1 ; Assign a name to the NetHASP ; License Manager. ; 1 name possible, up to 8 ;;NH_USELANANUM = <Num> ; Assign a lana number to be used ; as a communication channel. ; ; ;;NH_SESSION = <Num> ; See Adapting the Timeout Length ;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide. [NH_TCPIP] ; ; NetHASP does not support TCP/IP under DOS. ; ; ; Section-specific Keywords for the TCP/IP protocol. ; NH_SERVER_ADDR = 192.168.0.10 ; IP addresses of all the NetHASP ; License Managers you want to search. ; Unlimited addresses and multiple ; lines are possible. ; ; Possible address format examples: NH_PORT_NUMBER = 475 ; Set the TCP/IP port number. This is ; optional. The default number is 475. NH_TCPIP_METHOD = TCP ; Send a TCP packet or UDP packet ; Default: UDP NH_USE_BROADCAST = Disabled ; Use TCPI/IP Broadcast mechanism. ;NH_SERVER_NAME = LM1 ; Communicate with the NetHASP ; Server with the specified name. ; Maximum: 6 names, up to 7 ; case-insensitive characters each. ; ; General Keywords. ; ;NH_SESSION = 15 ; See Adapting the Timeout Length ;NH_SEND_RCV = 30 ; in the HASP Programmer's Guide. По Telnet`у без проблем заходит по 475 порту. Брандмауэры отключены. HASP LM исключён из DEP. В чём причина понять не могу. Может всё же что то не так указал в .ini файликах, хотя уже помоему перепробовал все варианты.
#1
by Amra
Лицензия на пользователей это не на сервер. Сервер покупали? В тот сервер, где он установлен, серверный ключ включен?
#3
by boy-koff
Сервер покупали но очень давно. Ключ включен. Локально он работает. Alladdin Monitor со второго сервера видит лицензии.
#14
by Serg_1960
"Назначение, установка и администрирование ключей защиты HASP для «1С:Предприятие» 8" Маркировка, назначение, внешний вид, описание и особенности использования.
#16
by Serg_1960
"локальный ключ недоступен: Status=0, EN8SA Локальный, не установлен" - перевожу: 1С:Сервер (x64) не может быть запущен - нет ключа на 64бит. Почему? Может быть потому, что "Ошибся, ещё серверный ключ "H4 M1 ENSR8" - запускай 1С:Сервер (х32).
Тэги: 1С 8
Ответить:
Комментарии доступны только авторизированным пользователям
Похожие вопросы 1С
В этой группе 1С
- Залить поле Картинка цветом
- 1C 8.3 Как изменить предлагаемые реквизиты печати?
- как отозвать принятую накладную из ЕГАИС
- Открыть программно управляемую форму в обычном приложении. ЗУП 2.5.108.1
- ЕГАИС: Невозможно проверить функцию отзыва, т.к. сервер отзыва сертификатов...
- КД 2 Перенос картинки
- Разделение таблицы значений 1с 8
- Документ не записан, но Проведен = истина.
- не сохраняются картинки печатной формы в файл
- Не удаляется помеченный объект. Ссылка на РегистрСведенийКлючЗаписи...
- Перестал работать обмен с сайтом
- УФ Пересчет Итоги в подвале при стандартном Отборе в Табличной части документа..
- СКД. Суммирование группировок в разных колонках
- Лицензии 1с и com соединение
- Дедлоки, PostgreSQL и ЦУП
- УТ11. Сборка (разборка) товаров
- Доступ к пользователям в 1С Документооборот 2.1
- Кнопка печать в 1с 8.3
- ЗУП - начисление уволенному сотруднику
- Отчет СКД Обычные Формы Параметры и Отбор на форму